» Hyper-V Builder (from an ISO)

Type: hyperv-iso

The Hyper-V Packer builder is able to create Hyper-V virtual machines and export them, starting from an ISO image.

The builder builds a virtual machine by creating a new virtual machine from scratch. Typically, the VM is booted, an OS is installed, and software is provisioned within the OS. Finally the VM is shut down. The result of the Hyper-V builder is a directory containing all the files necessary to run the virtual machine portably.

» Basic Example

Here is a basic example. This example is not functional. It will start the OS installer but then fail because we don't provide the preseed file for Ubuntu to self-install. Still, the example serves to show the basic configuration:

{
  "type": "hyperv-iso",
  "iso_url": "http://releases.ubuntu.com/12.04/ubuntu-12.04.5-server-amd64.iso",
  "iso_checksum": "769474248a3897f4865817446f9a4a53",
  "iso_checksum_type": "md5",
  "ssh_username": "packer",
  "ssh_password": "packer",
  "shutdown_command": "echo 'packer' | sudo -S shutdown -P now"
}

By default Packer will perform a hard power off of a virtual machine. However, when a machine is powered off this way, it is possible that changes made to the VMs file system may not be fully synced, possibly leading to corruption of files or lost changes. As such, it is important to add a shutdown_command. This tells Packer how to safely shutdown and power off the VM.

» ISO Configuration Reference

By default, Packer will symlink, download or copy image files to the Packer cache into a "hash($iso_url+$iso_checksum).$iso_target_extension" file. Packer uses hashicorp/go-getter in file mode in order to perform a download.

go-getter supports the following protocols:

  • Local files
  • Git
  • Mercurial
  • HTTP
  • Amazon S3

Examples: go-getter can guess the checksum type based on iso_checksum len.

{ "iso_checksum": "946a6077af6f5f95a51f82fdc44051c7aa19f9cfc5f737954845a6050543d7c2", "iso_url": "ubuntu.org/.../ubuntu-14.04.1-server-amd64.iso" }

{
"iso_checksum_type": "file",
"iso_checksum": "ubuntu.org/..../ubuntu-14.04.1-server-amd64.iso.sum",
"iso_url": "ubuntu.org/.../ubuntu-14.04.1-server-amd64.iso"
}
{
"iso_checksum_url": "./shasums.txt",
"iso_url": "ubuntu.org/.../ubuntu-14.04.1-server-amd64.iso"
}
{
"iso_checksum_type": "sha256",
"iso_checksum_url": "./shasums.txt",
"iso_url": "ubuntu.org/.../ubuntu-14.04.1-server-amd64.iso"
}

» Required:

  • iso_checksum (string) - The checksum for the ISO file or virtual hard drive file. The algorithm to use when computing the checksum can be optionally specified with iso_checksum_type. When iso_checksum_type is not set packer will guess the checksumming type based on iso_checksum length. iso_checksum can be also be a file or an URL, in which case iso_checksum_type must be set to file; the go-getter will download it and use the first hash found.

  • iso_url (string) - A URL to the ISO containing the installation image or virtual hard drive (VHD or VHDX) file to clone.

» Optional:

  • iso_checksum_url (string) - An URL to a checksum file containing a checksum for the ISO file. At least one of iso_checksum and iso_checksum_url must be defined. iso_checksum_url will be ignored if iso_checksum is non empty.

  • iso_checksum_type (string) - The algorithm to be used when computing the checksum of the file specified in iso_checksum. Currently, valid values are "", "none", "md5", "sha1", "sha256", "sha512" or "file". Since the validity of ISO and virtual disk files are typically crucial to a successful build, Packer performs a check of any supplied media by default. While setting "none" will cause Packer to skip this check, corruption of large files such as ISOs and virtual hard drives can occur from time to time. As such, skipping this check is not recommended. iso_checksum_type must be set to file when iso_checksum is an url.

  • iso_urls ([]string) - Multiple URLs for the ISO to download. Packer will try these in order. If anything goes wrong attempting to download or while downloading a single URL, it will move on to the next. All URLs must point to the same file (same checksum). By default this is empty and iso_url is used. Only one of iso_url or iso_urls can be specified.

  • iso_target_path (string) - The path where the iso should be saved after download. By default will go in the packer cache, with a hash of the original filename and checksum as its name.

  • iso_target_extension (string) - The extension of the iso file after download. This defaults to iso.

» Configuration Reference

There are many configuration options available for the Hyper-V builder. They are organized below into two categories: required and optional. Within each category, the available options are alphabetized and described.

In addition to the options listed here, a communicator can be configured for this builder.

» Optional:

  • output_directory (string) - This setting specifies the directory that artifacts from the build, such as the virtual machine files and disks, will be output to. The path to the directory may be relative or absolute. If relative, the path is relative to the working directory packer is executed from. This directory must not exist or, if created, must be empty prior to running the builder. By default this is "output-BUILDNAME" where "BUILDNAME" is the name of the build.
  • disk_size (uint) - The size, in megabytes, of the hard disk to create for the VM. By default, this is 40 GB.

  • use_legacy_network_adapter (bool) - If true use a legacy network adapter as the NIC. This defaults to false. A legacy network adapter is fully emulated NIC, and is thus supported by various exotic operating systems, but this emulation requires additional overhead and should only be used if absolutely necessary.

  • differencing_disk (bool) - If true enables differencing disks. Only the changes will be written to the new disk. This is especially useful if your source is a VHD/VHDX. This defaults to false.

  • use_fixed_vhd_format (bool) - If true, creates the boot disk on the virtual machine as a fixed VHD format disk. The default is false, which creates a dynamic VHDX format disk. This option requires setting generation to 1, skip_compaction to true, and differencing_disk to false. Additionally, any value entered for disk_block_size will be ignored. The most likely use case for this option is outputing a disk that is in the format required for upload to Azure.

  • disk_block_size (uint) - The block size of the VHD to be created. Recommended disk block size for Linux hyper-v guests is 1 MiB. This defaults to "32" MiB.

  • memory (uint) - The amount, in megabytes, of RAM to assign to the VM. By default, this is 1 GB.

  • secondary_iso_images ([]string) - A list of ISO paths to attach to a VM when it is booted. This is most useful for unattended Windows installs, which look for an Autounattend.xml file on removable media. By default, no secondary ISO will be attached.

  • disk_additional_size ([]uint) - The size or sizes of any additional hard disks for the VM in megabytes. If this is not specified then the VM will only contain a primary hard disk. Additional drives will be attached to the SCSI interface only. The builder uses expandable rather than fixed-size virtual hard disks, so the actual file representing the disk will not use the full size unless it is full.

  • guest_additions_mode (string) - If set to attach then attach and mount the ISO image specified in guest_additions_path. If set to none then guest additions are not attached and mounted; This is the default.

  • guest_additions_path (string) - The path to the ISO image for guest additions.

  • vm_name (string) - This is the name of the new virtual machine, without the file extension. By default this is "packer-BUILDNAME", where "BUILDNAME" is the name of the build.

  • switch_name (string) - The name of the switch to connect the virtual machine to. By default, leaving this value unset will cause Packer to try and determine the switch to use by looking for an external switch that is up and running.

  • switch_vlan_id (string) - This is the VLAN of the virtual switch's network card. By default none is set. If none is set then a VLAN is not set on the switch's network card. If this value is set it should match the VLAN specified in by vlan_id.

  • mac_address (string) - This allows a specific MAC address to be used on the default virtual network card. The MAC address must be a string with no delimiters, for example "0000deadbeef".

  • vlan_id (string) - This is the VLAN of the virtual machine's network card for the new virtual machine. By default none is set. If none is set then VLANs are not set on the virtual machine's network card.

  • cpus (uint) - The number of CPUs the virtual machine should use. If this isn't specified, the default is 1 CPU.

  • generation (uint) - The Hyper-V generation for the virtual machine. By default, this is 1. Generation 2 Hyper-V virtual machines do not support floppy drives. In this scenario use secondary_iso_images instead. Hard drives and DVD drives will also be SCSI and not IDE.

  • enable_mac_spoofing (bool) - If true enable MAC address spoofing for the virtual machine. This defaults to false.

  • enable_dynamic_memory (bool) - If true enable dynamic memory for the virtual machine. This defaults to false.

  • enable_secure_boot (bool) - If true enable secure boot for the virtual machine. This defaults to false. See secure_boot_template below for additional settings.

  • secure_boot_template (string) - The secure boot template to be configured. Valid values are "MicrosoftWindows" (Windows) or "MicrosoftUEFICertificateAuthority" (Linux). This only takes effect if enable_secure_boot is set to "true". This defaults to "MicrosoftWindows".

  • enable_virtualization_extensions (bool) - If true enable virtualization extensions for the virtual machine. This defaults to false. For nested virtualization you need to enable MAC spoofing, disable dynamic memory and have at least 4GB of RAM assigned to the virtual machine.

  • temp_path (string) - The location under which Packer will create a directory to house all the VM files and folders during the build. By default %TEMP% is used which, for most systems, will evaluate to %USERPROFILE%/AppData/Local/Temp.

    The build directory housed under temp_path will have a name similar to packerhv1234567. The seven digit number at the end of the name is automatically generated by Packer to ensure the directory name is unique.

  • configuration_version (string) - This allows you to set the vm version when calling New-VM to generate the vm.

  • keep_registered (bool) - If "true", Packer will not delete the VM from The Hyper-V manager.

  • communicator (string) - Communicator

  • skip_compaction (bool) - If true skip compacting the hard disk for the virtual machine when exporting. This defaults to false.

  • skip_export (bool) - If true Packer will skip the export of the VM. If you are interested only in the VHD/VHDX files, you can enable this option. The resulting VHD/VHDX file will be output to /Virtual Hard Disks. By default this option is false and Packer will export the VM to output_directory.

  • headless (bool) - Packer defaults to building Hyper-V virtual machines by launching a GUI that shows the console of the machine being built. When this value is set to true, the machine will start without a console.

» Http directory configuration reference

Packer will create an http server serving http_directory when it is set, a random free port will be selected and the architecture of the directory referenced will be available in your builder.

Example usage from a builder:

wget http://{{ .HTTPIP }}:{{ .HTTPPort }}/foo/bar/preseed.cfg

» Optional:

  • http_directory (string) - Path to a directory to serve using an HTTP server. The files in this directory will be available over HTTP that will be requestable from the virtual machine. This is useful for hosting kickstart files and so on. By default this is an empty string, which means no HTTP server will be started. The address and port of the HTTP server will be available as variables in boot_command. This is covered in more detail below.

  • http_port_min (int) - These are the minimum and maximum port to use for the HTTP server started to serve the http_directory. Because Packer often runs in parallel, Packer will choose a randomly available port in this range to run the HTTP server. If you want to force the HTTP server to be on one port, make this minimum and maximum port the same. By default the values are 8000 and 9000, respectively.

  • http_port_max (int) - HTTP Port Max

» Shutdown configuration reference

» Optional:

  • shutdown_command (string) - The command to use to gracefully shut down the machine once all provisioning is complete. By default this is an empty string, which tells Packer to just forcefully shut down the machine. This setting can be safely omitted if for example, a shutdown command to gracefully halt the machine is configured inside a provisioning script. If one or more scripts require a reboot it is suggested to leave this blank (since reboots may fail) and instead specify the final shutdown command in your last script.

  • shutdown_timeout (duration string | ex: "1h5m2s") - The amount of time to wait after executing the shutdown_command for the virtual machine to actually shut down. If the machine doesn't shut down in this time it is considered an error. By default, the time out is "5m" (five minutes).

» Floppy configuration reference

A floppy can be made available for your build. This is most useful for unattended Windows installs, which look for an Autounattend.xml file on removable media. By default, no floppy will be attached. All files listed in this setting get placed into the root directory of the floppy and the floppy is attached as the first floppy device. The summary size of the listed files must not exceed 1.44 MB. The supported ways to move large files into the OS are using http_directory or the file provisioner.

» Optional:

  • floppy_files ([]string) - A list of files to place onto a floppy disk that is attached when the VM is booted. Currently, no support exists for creating sub-directories on the floppy. Wildcard characters (, ?, and []) are allowed. Directory names are also allowed, which will add all the files found in the directory to the floppy.

  • floppy_dirs ([]string) - A list of directories to place onto the floppy disk recursively. This is similar to the floppy_files option except that the directory structure is preserved. This is useful for when your floppy disk includes drivers or if you just want to organize it's contents as a hierarchy. Wildcard characters (, ?, and []) are allowed. The maximum summary size of all files in the listed directories are the same as in floppy_files.

  • floppy_label (string) - Floppy Label

» Boot Configuration Reference

The boot configuration is very important: boot_command specifies the keys to type when the virtual machine is first booted in order to start the OS installer. This command is typed after boot_wait, which gives the virtual machine some time to actually load.

The boot_command is an array of strings. The strings are all typed in sequence. It is an array only to improve readability within the template.

There are a set of special keys available. If these are in your boot command, they will be replaced by the proper key:

  • <bs> - Backspace

  • <del> - Delete

  • <enter> <return> - Simulates an actual "enter" or "return" keypress.

  • <esc> - Simulates pressing the escape key.

  • <tab> - Simulates pressing the tab key.

  • <f1> - <f12> - Simulates pressing a function key.

  • <up> <down> <left> <right> - Simulates pressing an arrow key.

  • <spacebar> - Simulates pressing the spacebar.

  • <insert> - Simulates pressing the insert key.

  • <home> <end> - Simulates pressing the home and end keys.

  • <pageUp> <pageDown> - Simulates pressing the page up and page down keys.

  • <menu> - Simulates pressing the Menu key.

  • <leftAlt> <rightAlt> - Simulates pressing the alt key.

  • <leftCtrl> <rightCtrl> - Simulates pressing the ctrl key.

  • <leftShift> <rightShift> - Simulates pressing the shift key.

  • <leftSuper> <rightSuper> - Simulates pressing the ⌘ or Windows key.

  • <wait> <wait5> <wait10> - Adds a 1, 5 or 10 second pause before sending any additional keys. This is useful if you have to generally wait for the UI to update before typing more.

  • <waitXX> - Add an arbitrary pause before sending any additional keys. The format of XX is a sequence of positive decimal numbers, each with optional fraction and a unit suffix, such as 300ms, 1.5h or 2h45m. Valid time units are ns, us (or µs), ms, s, m, h. For example <wait10m> or <wait1m20s>.

  • <XXXOn> <XXXOff> - Any printable keyboard character, and of these "special" expressions, with the exception of the <wait> types, can also be toggled on or off. For example, to simulate ctrl+c, use <leftCtrlOn>c<leftCtrlOff>. Be sure to release them, otherwise they will be held down until the machine reboots. To hold the c key down, you would use <cOn>. Likewise, <cOff> to release.

  • {{ .HTTPIP }} {{ .HTTPPort }} - The IP and port, respectively of an HTTP server that is started serving the directory specified by the http_directory configuration parameter. If http_directory isn't specified, these will be blank!

  • Name - The name of the VM.

Example boot command. This is actually a working boot command used to start an CentOS 6.4 installer:

"boot_command": [
    "<tab><wait>",
    " ks=http://{{ .HTTPIP }}:{{ .HTTPPort }}/centos6-ks.cfg<enter>"
 ]

The example shown below is a working boot command used to start an Ubuntu 12.04 installer:

[
  "<esc><esc><enter><wait>",
  "/install/vmlinuz noapic ",
  "preseed/url=http://{{ .HTTPIP }}:{{ .HTTPPort }}/preseed.cfg ",
  "debian-installer=en_US auto locale=en_US kbd-chooser/method=us ",
  "hostname={{ .Name }} ",
  "fb=false debconf/frontend=noninteractive ",
  "keyboard-configuration/modelcode=SKIP keyboard-configuration/layout=USA ",
  "keyboard-configuration/variant=USA console-setup/ask_detect=false ",
  "initrd=/install/initrd.gz -- <enter>"
]

For more examples of various boot commands, see the sample projects from our community templates page.

» Optional:

  • boot_keygroup_interval (duration string | ex: "1h5m2s") - Time to wait after sending a group of key pressses. The value of this should be a duration. Examples are 5s and 1m30s which will cause Packer to wait five seconds and one minute 30 seconds, respectively. If this isn't specified, a sensible default value is picked depending on the builder type.

  • boot_wait (duration string | ex: "1h5m2s") - The time to wait after booting the initial virtual machine before typing the boot_command. The value of this should be a duration. Examples are 5s and 1m30s which will cause Packer to wait five seconds and one minute 30 seconds, respectively. If this isn't specified, the default is 10s or 10 seconds.

  • boot_command ([]string) - This is an array of commands to type when the virtual machine is first booted. The goal of these commands should be to type just enough to initialize the operating system installer. Special keys can be typed as well, and are covered in the section below on the boot command. If this is not specified, it is assumed the installer will start itself.

» Integration Services

Packer will automatically attach the integration services ISO as a DVD drive for the version of Hyper-V that is running.

» Generation 1 vs Generation 2

Floppy drives are no longer supported by generation 2 machines. This requires you to take another approach when dealing with preseed or answer files. Two possible options are using virtual DVD drives or using Packers built in web server.

When dealing with Windows you need to enable UEFI drives for generation 2 virtual machines.

» Creating an ISO From a Directory

Programs like mkisofs can be used to create an ISO from a directory. There is a windows version of mkisofs available.

Below is a working PowerShell script that can be used to create a Windows answer ISO:

$isoFolder = "answer-iso"
if (test-path $isoFolder){
  remove-item $isoFolder -Force -Recurse
}

if (test-path windows\windows-2012R2-serverdatacenter-amd64\answer.iso){
  remove-item windows\windows-2012R2-serverdatacenter-amd64\answer.iso -Force
}

mkdir $isoFolder

copy windows\windows-2012R2-serverdatacenter-amd64\Autounattend.xml $isoFolder\
copy windows\windows-2012R2-serverdatacenter-amd64\sysprep-unattend.xml $isoFolder\
copy windows\common\set-power-config.ps1 $isoFolder\
copy windows\common\microsoft-updates.ps1 $isoFolder\
copy windows\common\win-updates.ps1 $isoFolder\
copy windows\common\run-sysprep.ps1 $isoFolder\
copy windows\common\run-sysprep.cmd $isoFolder\

$textFile = "$isoFolder\Autounattend.xml"

$c = Get-Content -Encoding UTF8 $textFile

# Enable UEFI and disable Non EUFI
$c | % { $_ -replace '<!-- Start Non UEFI -->','<!-- Start Non UEFI' } | % { $_ -replace '<!-- Finish Non UEFI -->','Finish Non UEFI -->' } | % { $_ -replace '<!-- Start UEFI compatible','<!-- Start UEFI compatible -->' } | % { $_ -replace 'Finish UEFI compatible -->','<!-- Finish UEFI compatible -->' } | sc -Path $textFile

& .\mkisofs.exe -r -iso-level 4 -UDF -o windows\windows-2012R2-serverdatacenter-amd64\answer.iso $isoFolder

if (test-path $isoFolder){
  remove-item $isoFolder -Force -Recurse
}

» Example For Windows Server 2012 R2 Generation 2

Packer config:

{
  "builders": [
    {
      "vm_name":"windows2012r2",
      "type": "hyperv-iso",
      "disk_size": 61440,
      "floppy_files": [],
      "secondary_iso_images": [
        "./windows/windows-2012R2-serverdatacenter-amd64/answer.iso"
      ],
      "http_directory": "./windows/common/http/",
      "boot_wait": "0s",
      "boot_command": [
        "a<wait>a<wait>a"
      ],
      "iso_url": "http://download.microsoft.com/download/6/2/A/62A76ABB-9990-4EFC-A4FE-C7D698DAEB96/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_EVAL_EN-US-IRM_SSS_X64FREE_EN-US_DV5.ISO",
      "iso_checksum_type": "md5",
      "iso_checksum": "458ff91f8abc21b75cb544744bf92e6a",
      "communicator":"winrm",
      "winrm_username": "vagrant",
      "winrm_password": "vagrant",
      "winrm_timeout" : "4h",
      "shutdown_command": "f:\\run-sysprep.cmd",
      "memory": 4096,
      "cpus": 4,
      "generation": 2,
      "switch_name":"LAN",
      "enable_secure_boot":true
    }
  ],
  "provisioners": [
    {
      "type": "powershell",
      "elevated_user":"vagrant",
      "elevated_password":"vagrant",
      "scripts": [
        "./windows/common/install-7zip.ps1",
        "./windows/common/install-chef.ps1",
        "./windows/common/compile-dotnet-assemblies.ps1",
        "./windows/common/cleanup.ps1",
        "./windows/common/ultradefrag.ps1",
        "./windows/common/sdelete.ps1"
      ]
    }
  ],
  "post-processors": [
    {
      "type": "vagrant",
      "keep_input_artifact": false,
      "output": "{{.Provider}}_windows-2012r2_chef.box"
    }
  ]
}

autounattend.xml:

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <!-- Start Non UEFI -->
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Type>Primary</Type>
                            <Order>1</Order>
                            <Size>350</Size>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>2</Order>
                            <Type>Primary</Type>
                            <Extend>true</Extend>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Active>true</Active>
                            <Format>NTFS</Format>
                            <Label>boot</Label>
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Format>NTFS</Format>
                            <Label>Windows 2012 R2</Label>
                            <Letter>C</Letter>
                            <Order>2</Order>
                            <PartitionID>2</PartitionID>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Key>/IMAGE/NAME </Key>
                            <Value>Windows Server 2012 R2 SERVERSTANDARD</Value>
                        </MetaData>
                    </InstallFrom>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>2</PartitionID>
                    </InstallTo>
                </OSImage>
            </ImageInstall>
            <!-- Finish Non UEFI -->
            <!-- Start UEFI compatible
            <DiskConfiguration>
                <Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Size>300</Size>
                            <Type>Primary</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>2</Order>
                            <Size>100</Size>
                            <Type>EFI</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>3</Order>
                            <Size>128</Size>
                            <Type>MSR</Type>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>4</Order>
                            <Extend>true</Extend>
                            <Type>Primary</Type>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Order>1</Order>
                            <PartitionID>1</PartitionID>
                            <Label>WINRE</Label>
                            <Format>NTFS</Format>
                            <TypeID>de94bba4-06d1-4d40-a16a-bfd50179d6ac</TypeID>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>2</Order>
                            <PartitionID>2</PartitionID>
                            <Label>System</Label>
                            <Format>FAT32</Format>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>3</Order>
                            <PartitionID>3</PartitionID>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>4</Order>
                            <PartitionID>4</PartitionID>
                            <Label>Windows</Label>
                            <Format>NTFS</Format>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>0</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
                <WillShowUI>OnError</WillShowUI>
            </DiskConfiguration>
            <ImageInstall>
                <OSImage>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Key>/IMAGE/NAME </Key>
                            <Value>Windows Server 2012 R2 SERVERSTANDARD</Value>
                        </MetaData>
                    </InstallFrom>
                    <InstallTo>
                        <DiskID>0</DiskID>
                        <PartitionID>4</PartitionID>
                    </InstallTo>
                </OSImage>
            </ImageInstall>
            Finish UEFI compatible -->
            <UserData>
                <!-- Product Key from http://technet.microsoft.com/en-us/library/jj612867.aspx -->
                <ProductKey>
                    <!-- Do not uncomment the Key element if you are using trial ISOs -->
                    <!-- You must uncomment the Key element (and optionally insert your own key) if you are using retail or volume license ISOs -->
                    <!--<Key>D2N9P-3P6X9-2R39C-7RTCD-MDVJX</Key>-->
                    <WillShowUI>OnError</WillShowUI>
                </ProductKey>
                <AcceptEula>true</AcceptEula>
                <FullName>Vagrant</FullName>
                <Organization>Vagrant</Organization>
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OEMInformation>
                <HelpCustomized>false</HelpCustomized>
            </OEMInformation>
            <ComputerName>vagrant-2012r2</ComputerName>
            <TimeZone>Coordinated Universal Time</TimeZone>
            <RegisteredOwner />
        </component>
        <component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
        </component>
        <component name="Microsoft-Windows-IE-ESC" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <IEHardenAdmin>false</IEHardenAdmin>
            <IEHardenUser>false</IEHardenUser>
        </component>
        <component name="Microsoft-Windows-OutOfBoxExperience" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DoNotOpenInitialConfigurationTasksAtLogon>true</DoNotOpenInitialConfigurationTasksAtLogon>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
    </settings>
    <settings pass="oobeSystem">
<!-- Start Setup cache proxy during installation
        <component name="Microsoft-Windows-IE-ClientNetworkProtocolImplementation" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <POLICYProxySettingsPerUser>0</POLICYProxySettingsPerUser>
            <HKLMProxyEnable>true</HKLMProxyEnable>
            <HKLMProxyServer>cache-proxy:3142</HKLMProxyServer>
        </component>
Finish Setup cache proxy during installation -->
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>vagrant</Value>
                    <PlainText>true</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <Username>vagrant</Username>
            </AutoLogon>
            <FirstLogonCommands>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
                    <Description>Set Execution Policy 64 Bit</Description>
                    <Order>1</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>C:\Windows\SysWOW64\cmd.exe /c powershell -Command "Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Force"</CommandLine>
                    <Description>Set Execution Policy 32 Bit</Description>
                    <Order>2</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm quickconfig -q</CommandLine>
                    <Description>winrm quickconfig -q</Description>
                    <Order>3</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm quickconfig -transport:http</CommandLine>
                    <Description>winrm quickconfig -transport:http</Description>
                    <Order>4</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config @{MaxTimeoutms="1800000"}</CommandLine>
                    <Description>Win RM MaxTimeoutms</Description>
                    <Order>5</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/winrs @{MaxMemoryPerShellMB="300"}</CommandLine>
                    <Description>Win RM MaxMemoryPerShellMB</Description>
                    <Order>6</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/service @{AllowUnencrypted="true"}</CommandLine>
                    <Description>Win RM AllowUnencrypted</Description>
                    <Order>7</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/service/auth @{Basic="true"}</CommandLine>
                    <Description>Win RM auth Basic</Description>
                    <Order>8</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/client/auth @{Basic="true"}</CommandLine>
                    <Description>Win RM client auth Basic</Description>
                    <Order>9</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/listener?Address=*+Transport=HTTP @{Port="5985"} </CommandLine>
                    <Description>Win RM listener Address/Port</Description>
                    <Order>10</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c netsh advfirewall firewall set rule group="remote administration" new enable=yes </CommandLine>
                    <Description>Win RM adv firewall enable</Description>
                    <Order>11</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c netsh advfirewall firewall add rule name="WinRM 5985" protocol=TCP dir=in localport=5985 action=allow</CommandLine>
                    <Description>Win RM port open</Description>
                    <Order>12</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c netsh advfirewall firewall add rule name="WinRM 5986" protocol=TCP dir=in localport=5986 action=allow</CommandLine>
                    <Description>Win RM port open</Description>
                    <Order>13</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c net stop winrm </CommandLine>
                    <Description>Stop Win RM Service </Description>
                    <Order>14</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c sc config winrm start= disabled</CommandLine>
                    <Description>Win RM Autostart</Description>
                    <Order>15</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v HideFileExt /t REG_DWORD /d 0 /f</CommandLine>
                    <Order>16</Order>
                    <Description>Show file extensions in Explorer</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\Console /v QuickEdit /t REG_DWORD /d 1 /f</CommandLine>
                    <Order>17</Order>
                    <Description>Enable QuickEdit mode</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v Start_ShowRun /t REG_DWORD /d 1 /f</CommandLine>
                    <Order>18</Order>
                    <Description>Show Run command in Start Menu</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ /v StartMenuAdminTools /t REG_DWORD /d 1 /f</CommandLine>
                    <Order>19</Order>
                    <Description>Show Administrative Tools in Start Menu</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateFileSizePercent /t REG_DWORD /d 0 /f</CommandLine>
                    <Order>20</Order>
                    <Description>Zero Hibernation File</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD HKLM\SYSTEM\CurrentControlSet\Control\Power\ /v HibernateEnabled /t REG_DWORD /d 0 /f</CommandLine>
                    <Order>21</Order>
                    <Description>Disable Hibernation Mode</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c wmic useraccount where "name='vagrant'" set PasswordExpires=FALSE</CommandLine>
                    <Order>22</Order>
                    <Description>Disable password expiration for vagrant user</Description>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/winrs @{MaxShellsPerUser="30"}</CommandLine>
                    <Description>Win RM MaxShellsPerUser</Description>
                    <Order>23</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c winrm set winrm/config/winrs @{MaxProcessesPerShell="25"}</CommandLine>
                    <Description>Win RM MaxProcessesPerShell</Description>
                    <Order>24</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>%SystemRoot%\System32\reg.exe ADD "HKLM\System\CurrentControlSet\Services\Netlogon\Parameters" /v DisablePasswordChange /t REG_DWORD /d 1 /f</CommandLine>
                    <Description>Turn off computer password</Description>
                    <Order>25</Order>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol=icmpv4:8,any dir=in action=allow</CommandLine>
                    <Description>ICMP open for ping</Description>
                    <Order>26</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <!-- WITH WINDOWS UPDATES -->
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c IF EXIST a:\set-power-config.ps1 (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\set-power-config.ps1) ELSE (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File f:\set-power-config.ps1)</CommandLine>
                    <Order>97</Order>
                    <Description>Turn off all power saving and timeouts</Description>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c IF EXIST a:\microsoft-updates.ps1 (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\microsoft-updates.ps1) ELSE (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File f:\microsoft-updates.ps1)</CommandLine>
                    <Order>98</Order>
                    <Description>Enable Microsoft Updates</Description>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd.exe /c IF EXIST a:\win-updates.ps1 (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File a:\win-updates.ps1) ELSE (C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -File f:\win-updates.ps1)</CommandLine>
                    <Description>Install Windows Updates</Description>
                    <Order>100</Order>
                    <RequiresUserInput>true</RequiresUserInput>
                </SynchronousCommand>
                <!-- END WITH WINDOWS UPDATES -->
            </FirstLogonCommands>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <HideLocalAccountScreen>true</HideLocalAccountScreen>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                <NetworkLocation>Work</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>vagrant</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>vagrant</Value>
                            <PlainText>true</PlainText>
                        </Password>
                        <Group>administrators</Group>
                        <DisplayName>Vagrant</DisplayName>
                        <Name>vagrant</Name>
                        <Description>Vagrant User</Description>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOwner />
            <TimeZone>Coordinated Universal Time</TimeZone>
        </component>
    </settings>
    <settings pass="offlineServicing">
        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <EnableLUA>false</EnableLUA>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:c:/projects/baseboxes/9600.16384.winblue_rtm.130821-1623_x64fre_server_eval_en-us-irm_sss_x64free_en-us_dv5_slipstream/sources/install.wim#Windows Server 2012 R2 SERVERDATACENTER" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

sysprep-unattend.xml:

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="generalize">
        <component language="neutral" name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipRearm>1</SkipRearm>
        </component>
    </settings>
    <settings pass="oobeSystem">
<!-- Setup proxy after sysprep
       <component name="Microsoft-Windows-IE-ClientNetworkProtocolImplementation" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <POLICYProxySettingsPerUser>1</POLICYProxySettingsPerUser>
            <HKLMProxyEnable>false</HKLMProxyEnable>
            <HKLMProxyServer>cache-proxy:3142</HKLMProxyServer>
        </component>
Finish proxy after sysprep -->
        <component language="neutral" name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>0809:00000809</InputLocale>
            <SystemLocale>en-GB</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-GB</UserLocale>
        </component>
        <component language="neutral" name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                <NetworkLocation>Work</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
                <SkipUserOOBE>true</SkipUserOOBE>
                <SkipMachineOOBE>true</SkipMachineOOBE>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>vagrant</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>vagrant</Value>
                            <PlainText>true</PlainText>
                        </Password>
                        <Group>administrators</Group>
                        <DisplayName>Vagrant</DisplayName>
                        <Name>vagrant</Name>
                        <Description>Vagrant User</Description>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <DisableAutoDaylightTimeSet>true</DisableAutoDaylightTimeSet>
            <TimeZone>Coordinated Universal Time</TimeZone>
            <VisualEffects>
                <SystemDefaultBackgroundColor>2</SystemDefaultBackgroundColor>
            </VisualEffects>
        </component>
    </settings>
</unattend>

» Example For Ubuntu Vivid Generation 2

If you are running Windows under virtualization, you may need to create a virtual switch with an External connection type.

» Packer config:

{
  "variables": {
    "vm_name": "ubuntu-xenial",
    "cpus": "2",
    "memory": "1024",
    "disk_size": "21440",
    "iso_url": "http://releases.ubuntu.com/16.04/ubuntu-16.04.6-server-amd64.iso",
    "iso_checksum_type": "sha1",
    "iso_checksum": "056b7c15efc15bbbf40bf1a9ff1a3531fcbf70a2"
  },
  "builders": [
    {
      "vm_name":"{{user `vm_name`}}",
      "type": "hyperv-iso",
      "disk_size": "{{user `disk_size`}}",
      "guest_additions_mode": "disable",
      "iso_url": "{{user `iso_url`}}",
      "iso_checksum_type": "{{user `iso_checksum_type`}}",
      "iso_checksum": "{{user `iso_checksum`}}",
      "communicator":"ssh",
      "ssh_username": "packer",
      "ssh_password": "packer",
      "ssh_timeout" : "4h",
      "http_directory": "./",
      "boot_wait": "5s",
      "boot_command": [
        "<esc><wait10><esc><esc><enter><wait>",
        "set gfxpayload=1024x768<enter>",
        "linux /install/vmlinuz ",
        "preseed/url=http://{{.HTTPIP}}:{{.HTTPPort}}/hyperv-taliesins.cfg ",
        "debian-installer=en_US auto locale=en_US kbd-chooser/method=us ",
        "hostname={{.Name}} ",
        "fb=false debconf/frontend=noninteractive ",
        "keyboard-configuration/modelcode=SKIP keyboard-configuration/layout=USA ",
        "keyboard-configuration/variant=USA console-setup/ask_detect=false <enter>",
        "initrd /install/initrd.gz<enter>",
        "boot<enter>"
      ],
      "shutdown_command": "echo 'packer' | sudo -S -E shutdown -P now",
      "memory": "{{user `memory`}}",
      "cpus": "{{user `cpus`}}",
      "generation": 2,
      "enable_secure_boot": false
    }
  ]
}

» preseed.cfg:

## Options to set on the command line
d-i debian-installer/locale string en_US.utf8
d-i console-setup/ask_detect boolean false
d-i console-setup/layout string us

d-i netcfg/get_hostname string nl-ams-basebox3
d-i netcfg/get_domain string unassigned-domain

d-i time/zone string UTC
d-i clock-setup/utc-auto boolean true
d-i clock-setup/utc boolean true

d-i kbd-chooser/method select American English

d-i netcfg/wireless_wep string

d-i base-installer/kernel/override-image string linux-server

d-i debconf debconf/frontend select Noninteractive

d-i pkgsel/install-language-support boolean false
tasksel tasksel/first multiselect standard, ubuntu-server

## Partitioning
d-i partman-auto/method string lvm

d-i partman-lvm/confirm boolean true
d-i partman-lvm/device_remove_lvm boolean true
d-i partman-lvm/confirm boolean true

d-i partman-auto-lvm/guided_size string max
d-i partman-auto/choose_recipe select atomic

d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

# Write the changes to disks and configure LVM?
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

d-i partman-partitioning/no_bootable_gpt_biosgrub boolean false
d-i partman-partitioning/no_bootable_gpt_efi boolean false
d-i partman-efi/non_efi_system boolean true

# Default user
d-i passwd/user-fullname string packer
d-i passwd/username string packer
d-i passwd/user-password password packer
d-i passwd/user-password-again password packer
d-i user-setup/encrypt-home boolean false
d-i user-setup/allow-password-weak boolean true

# Minimum packages
d-i pkgsel/include string openssh-server ntp linux-tools-$(uname -r) linux-cloud-tools-$(uname -r) linux-cloud-tools-common

# Upgrade packages after debootstrap? (none, safe-upgrade, full-upgrade)
# (note: set to none for speed)
d-i pkgsel/upgrade select none

d-i grub-installer/only_debian boolean true
d-i grub-installer/with_other_os boolean true
d-i finish-install/reboot_in_progress note

d-i pkgsel/update-policy select none

choose-mirror-bin mirror/http/proxy string